Honda Civic manuals

Subaru Legacy Owners Manual: Initialization of power window

Subaru Legacy Owners Manual / Keys and doors / Windows / Initialization of power window

If the vehicle's battery is disconnected due to situations such as battery or fuse replacement, the following functions are deactivated.

  •  One-touch auto up/down function
  •  Anti-entrapment function (driver's window)
  •  Anti-entrapment function (front passenger's window - if equipped)

Initialize the power window in the following procedure to reactivate such functions.

  1.  Close the driver's door.
  2.  Turn the ignition switch to the "ON" position.
  3.  Open the driver's side window halfway by pushing down the power window switch.
  4.  Pull up the power window switch and close the window completely. Continue pulling up the switch for approximately 1 second after the window is closed completely.

If the front passenger's window is equipped with the auto-up/down function, it is necessary to repeat the same initialization procedure on that window switch.

Operating the rear passenger's windows
To open: Press the switch down and hold it until the window reaches the desired position. To close: Pull the switch up and hold it until the window reaches the desired position. When the ...

Trunk lid (Legacy)
WARNING  To prevent dangerous exhaust gas from entering the vehicle, always keep the trunk lid closed while driving.  Help prevent children, adults or animals ...

Other materials:

Electrical component location location
1. ENGINE COMPARTMENT(1)Pressure sensor(2)A/C compressor(Refrigerant flow sensor, variable flow change solenoid)(3)Ambient sensor2. PASSENGER COMPARTMENT(1)Evaporator sensor(5)Sunload sensor(9)A/C control panel(2)Air mix door actuator*1 or air mix door actuator LH*2(6)Intake door actuator(10)Air mix ...

© 2017-2019 Copyright