Honda Civic manuals

Subaru Legacy Service Manual: Installation

NOTE:

Refer to “Drive Pinion Shaft” for installation procedures. Drive Pinion Shaft Assembly > INSTALLATION

Inspection
Check the following items.• Check the oil pump for damage and wear.• Rotate the oil pump by hand, and check that it rotates smoothly.1. Measure the secondary pressure. Secondary Pressure ...

Oil pump chain
...

Other materials:

Removal
1. Hold the rear gate to the fully open position.2. Disconnect the ground terminal from battery sensor. NOTE3. Release the claws and then remove the cap - rear quarter pillar UPR LH.4. Remove the rod - power rear gate.CAUTION:• Using a small flat tip screwdriver wrapped with protective tape, ...

© 2017-2019 Copyright www.sulegacy.com