Subaru Legacy BN/BS (2015-2019) Service Manual: Removal
1. Remove the manual transmission assembly from the vehicle. Manual Transmission Assembly > REMOVAL 2. Remove the transfer case together with the extension case assembly. Transfer Case and Extension Case Assembly > REMOVAL 3. Remove the transmission case. Transmission Case > REMOVAL 4. Remove the drive pinion shaft assembly. Drive Pinion Shaft Assembly > REMOVAL 5. Remove the main shaft assembly. |
Adjustment
Selection of main shaft rear plate:Measure the protrusion amount (A) of bearing from transmission main case surface, and select a suitable plate in the following table.NOTE:Before measuring, tap the e ...
Other materials:
Installation
1. Clean the mating surfaces of the transmission case, transfer case and extension case.2. Apply a coat of grease to the taper roller bearing (transfer case side) of transfer driven gear and the roller rolling surface of the taper roller bearing (extension case side).Grease:NICHIMOLY N-130 or equiva ...
© 2017-2025 Copyright www.sulegacy.com
