Honda Civic manuals

Subaru Legacy Service Manual: Specification

1. TORQUE CONVERTER

Model

3.6 L non-turbo

Type

Symmetric, 3-element, single stage, 2-phase torque converter

Stall torque ratio

1.80

Nominal

mm (in)

246 (9.69)

Stall speed (at sea level)

r/min

1,870 — 2,900 (D range)

1,750 — 2,750 (R range)

One-way clutch

Sprag type one-way clutch

2. OIL PUMP

Type

Internal gear pump

Driving method

Driven by chain

Number of teeth

Inner rotor

8

Outer rotor

9

3. TRANSMISSION CONTROL ELEMENT

Type

Forward continuously variable speed change, 1 reverse, planetary gear

Multi-plate clutch

1 set

Multi-plate brake

1 set

4. TRANSMISSION GEAR RATIO

Forward

3.105 — 0.482

Rev

3.018

5. PLATE

Number of input clutch drive plates

5

Number of forward clutch drive plates

6

Number of reverse brake drive plates

5

6. SELECTOR POSITION

P (Park)

Transmission neutral, output shaft locked, engine start enabled

R (Reverse)

Rev

N (Neutral)

Transmission neutral, engine start enabled

D (Drive)

Forward continuously variable speed change

M (Manual mode) (paddle shift +side)

Manual gear change

1st > 2nd > 3rd > 4th > 5th > 6th

M (Manual mode) (paddle shift −side)

Manual gear change

1st ← 2nd ← 3rd ← 4th ← 5th ← 6th

7. HYDRAULIC CONTROL AND LUBRICATION

Type

Electronic hydraulic control (speed changed by signals of vehicle speed and accelerator opening angle)

Fluid

Specified fluid: Subaru High Torque CVT Fluid

CAUTION:

Always use specified CVTF. Using other fluid will cause malfunction.

Fluid capacity

L (US qt, Imp qt)

12.45 — 12.95 (13.2 — 13.7, 11.0 — 11.4)

Lubrication system

Forced feed lubrication with oil pump

8. COOLING AND HARNESS

Model

Sedan

OUTBACK

Cooling system

Liquid-cooler incorporated in radiator

Liquid-cooler incorporated in radiator + CVTF cooler (air cool)

Inhibitor switch harness

12 poles

Transmission harness

20 poles

9. TRANSFER

Transfer type

Multi-plate transfer (MP-T)

Number of transfer clutch drives & driven plates

6

Control method

Electronic hydraulic type

Reduction gear ratio

1.000 (37/37)

10. REDUCTION GEAR RATIO

Front final reduction gear ratio

4.111

11. FRONT DIFFERENTIAL GEAR OIL

Fluid

Recommended fluid: SUBARU GEAR OIL EXTRA MT

CAUTION:

If an alternative transmission oil is used, you may not have expected functionality and performance.

Alternative fluid: GL-5 (75W-90)

Fluid capacity

L (US qt, Imp qt)

1.3 — 1.5 (1.4 — 1.6, 1.1 — 1.3)

General description
...

Caution
• Wear appropriate work clothing, including a cap, protective goggles and protective shoes when performing any work.• Remove contamination including dirt and corrosion before removal, inst ...

Other materials:

Removal
1. SEDAN MODEL1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. NOTE2. Remove the rear seat cushion.CAUTION:If the hook - rear seat (a) is disconnected from the vehicle body, make sure to replace the hook - rear seat with a new part to ...

© 2017-2019 Copyright www.sulegacy.com