Subaru Legacy BN/BS (2015-2019) Owners Manual: Airflow mode selection
Select the preferred airflow mode by pressing the airflow mode selection button or defroster button. Airflow modes are as follows.
A) Models with rear ventilators (Ventilation): Instrument panel outlets
A) Models with rear ventilators (Bi-level): Instrument panel outlets and the foot outlets
A) Models with rear ventilators (Heat): Foot outlets, both side outlets of the instrument panel and some through windshield defroster outlets (A small amount of air flows to the windshield and both side windows to prevent fogging.)
A) Models with rear ventilators (Heat-def): Windshield defroster outlets, foot outlets and both side outlets of the instrument panel
A) Models with rear ventilators (Defrost): Windshield defroster outlets and both side outlets of the instrument panel NOTE
|
" mode
or " 
" mode
is selected, the air conditioner compressor
automatically operates to more
quickly defog the windshield. At the
same time, the air inlet selection is
automatically set to the outside air
mode.
Temperature control
Turn the temperature control dial over a
range from the blue side (cool) to red side
(warm) to regulate the temperature of
airflow from the air outlets.
MAX A/C mode
Perform the following operati ...
Other materials:
Inspection
Repair or replace any faulty hoses, pipes, and clamps found in the inspection below.• Check for CVTF leaks in joints at the transmission, radiator, CVTF cooler (air cool), pipes, and hoses.• Check the clamp for deformation.• Lightly bend the hose and check for cracks in the surface ...
