Subaru Legacy BN/BS (2015-2019) Service Manual: Check list for interview check

Subaru Legacy BN/BS (2015-2019) Service Manual / Auto headlight beam leveler system (diagnostics) / Check list for interview check

• Inspect the following items regarding the vehicle’s state.

• Print out this page for interviewing customers.

Auto Headlight Beam Leveler System Check List for Interview Date the Vehicle is Received Year Month Day
Customer’s name		Registration No.	Initial year of registration Year Month Date
Customer’s name		Vehicle model	Frame number
Interviewer	Inspector	Engine type	Odometer reading
Customer specified content • • •
Date and time when the trouble occurred		Frequency of trouble occurrence	Always occurs Sometimes occurs ( times per day, times per month)
Condition of trouble occurrence (How the trouble occurs)		Weather	Fine • Cloudy • Rainy • Snowy • Others ( )
Condition of trouble occurrence (How the trouble occurs)		Temperature	°C (°F) — °C (°F)
Road conditions		Occurrence location
Accessory installation condition
Confirmation of trouble condition
Diagnostic code

Basic diagnostic procedure procedure

NOTE:Refer to STEERING RESPONSIVE FOG LIGHTS (DIAGNOSTICS) for models with steering responsive fog light system. Basic Diagnostic ProcedureSTEPCHECKYESNO1.PERFORM CUSTOMER INTERVIEW.Using the Check L ...

Clear memory mode operation

1. On «Start» display, select «Diagnosis».2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed».3. On «Main Menu» display, select «Each System».4. ...

Other materials:

Disassembly
NOTE:When replacing the coupling sleeve and synchronizer hub, replace them as a set. Because these must engage at the specified point, avoid disassembly as much as possible. If it is necessary to disassemble, mark the engaging points on the splines beforehand.1. Put vinyl tape around the main shaft ...