Subaru Legacy BN/BS (2015-2019) Service Manual: Cvtf

Assembly

1. Install the plugs.NOTE:• Use new O-rings.• Apply CVTF to the O-rings.Tightening torque:25 N·m (2.5 kgf-m, 18.4 ft-lb)2. Using ST, install the center support COMPL.ST 18270KA01 ...

Condition check

NOTE:When replacing CVTF, determine the condition inside the transmission body by inspecting the drained CVTF.Fluid conditionTrouble and possible causeCorrective actionMetal particles.Excessive wear o ...

Other materials:

Engine oil pressure inspection
1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the oil pressure switch. Oil Pressure Switch > REMOVAL3. Install the oil pressure gauge to the installation area for the oil pressure switch of the chain cover.4. Connect the ground terminal to battery sensor. NOTE5. Start the e ...