Subaru Legacy BN/BS (2015-2019) Service Manual: Dtc b1000 airbag ecu malfunction

Subaru Legacy BN/BS (2015-2019) Service Manual / Airbag system (diagnostics) / Diagnostic chart with trouble code / Dtc b1000 airbag ecu malfunction

DIAGNOSIS START CONDITION:

Ignition voltage is 10 V to 16 V.

DTC DETECTING CONDITION:

Airbag control module is faulty.

CAUTION:

Before performing diagnosis, refer to “CAUTION” in “General Description”. General Description > CAUTION

STEP	CHECK	YES	NO
1.CHECK DTC. Read the DTC. (Current malfunction) Read Diagnostic Trouble Code (DTC)	Is «Airbag ECU Malfunction» displayed-	Replace the airbag control module. Airbag Control Module	Perform the Clear Memory Mode. Clear Memory Mode

Dtc b11f0 disposal process complete

DIAGNOSIS START CONDITION:Ignition voltage is 10 V to 16 V.DTC DETECTING CONDITION:Disposal process of airbag control module is completed.CAUTION:Before performing diagnosis, refer to “CAUTION&r ...

Dtc b1006 airbag ecu malfunction

NOTE:Refer to DTC B1106 for details on DTC B1000. Diagnostic Chart with Trouble Code > DTC B1000 AIRBAG ECU MALFUNCTION ...

Other materials:

Removal
1. Disconnect the ground terminal from battery sensor. NOTE2. Lift up the vehicle, and then remove the rear wheels.3. Remove the sensor assembly - headlight beam leveler. (Model with auto headlight beam leveler) Rear Height Sensor > REMOVAL4. Remove the lateral link assembly - rear.(1) Remove the ...