Subaru Legacy BN/BS (2015-2019) Service Manual: Dtc b11f7 side impact deployment
DIAGNOSIS START CONDITION: Ignition voltage is 10 V to 16 V. DTC DETECTING CONDITION: Side impact ignition, side airbag sensor RH ignited This DTC is displayed when the side airbag module and curtain airbag module are deployed. Once this DTC is displayed, the memory cannot be cleared. Replace the following parts. • Airbag control module Airbag Control Module • Side airbag module (operating side) Side Airbag Module • Side airbag sensor (operating side) Side Airbag Sensor • Curtain airbag module (operating side) Curtain Airbag Module • Curtain airbag sensor (operating side) Curtain Airbag Sensor • Front door impact sensor (operating side) Front Door Impact Sensor • Front outer seat belt with pretensioner (operating side) Front Seat Belt |
Dtc b11f8 side impact deployment
DIAGNOSIS START CONDITION:Ignition voltage is 10 V to 16 V.DTC DETECTING CONDITION:Side impact ignition, side airbag sensor LH ignitedNOTE:For details on DTC B11F8. refer to DTC B11F7. Diagnostic Cha ...
Dtc b11f5 front impact deployment
DIAGNOSIS START CONDITION:Ignition voltage is 10 V to 16 V.DTC DETECTING CONDITION:Front impact ignition, ignition delay (when ignited simultaneously)NOTE:For details on DTC B11F5, refer to DTC B11F3. ...
Other materials:
Dtc p0157 o2 sensor circuit low voltage bank 2 sensor 2
DTC DETECTING CONDITION:Detected when two consecutive driving cycles with fault occur.CAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode Inspection Mode > PROCEDURE.WIRING DIAGRAM:• Engine Electrical System ENGINE T ...
