Subaru Legacy BN/BS (2015-2019) Service Manual: Dtc b1610 front sub sensor rh failure

Subaru Legacy BN/BS (2015-2019) Service Manual / Airbag system (diagnostics) / Diagnostic chart with trouble code / Dtc b1610 front sub sensor rh failure

DIAGNOSIS START CONDITION:

Ignition voltage is 10 V to 16 V.

DTC DETECTING CONDITION:

Front sub sensor RH unit internal malfunction

If DTC B1610 is displayed, the circuit within the front sub sensor RH is faulty.

Replace the front sub sensor RH. Front Sub Sensor

Dtc b1612 front sub sensor rh lost communication

DIAGNOSIS START CONDITION:Ignition voltage is 10 V to 16 V.DTC DETECTING CONDITION:Front sub sensor RH communication error (open/short circuit or connector connection failure between airbag CM and sen ...

Dtc b1907 short in front p/t lh (to ground)

DIAGNOSIS START CONDITION:Ignition voltage is 10 V to 16 V.DTC DETECTING CONDITION:GND short circuit failure (shorted to ground in rear harness, shorted to ground in front seat pretensioner LH, shorte ...

Other materials:

Installation
1. Check and adjust the operating rod of the vacuum booster assembly.(1) Measure the length between the vacuum booster assembly mounting surface and clevis pin hole.(2) If it is not within the specification, loosen the lock nut, rotate the vacuum booster assembly operating rod to adjust the rod leng ...