DIAGNOSIS START CONDITION: Ignition voltage is 10 V to 16 V. DTC DETECTING CONDITION: Front sub sensor LH unit internal malfunction If DTC B1615 is displayed, the circuit within the front sub sensor LH is faulty. Replace the front sub sensor LH. Front Sub Sensor |
Dtc b1617 front sub sensor lh lost communication
Dtc b1613 front sub sensor rh initialization errorDtc p014c a/f / o2 sensor slow response - rich to lean bank 1 sensor 1
DTC DETECTING CONDITION:Detected when two consecutive driving cycles with fault occur.CAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode Inspection Mode > PROCEDURE.STEPCHECKYESNO1.CHECK EXHAUST SYSTEM.NOTE:Check the foll ...