Subaru Legacy BN/BS (2015-2019) Service Manual: Dtc b1630 curtain airbag sensor rh failure

Subaru Legacy BN/BS (2015-2019) Service Manual / Airbag system (diagnostics) / Diagnostic chart with trouble code / Dtc b1630 curtain airbag sensor rh failure

DIAGNOSIS START CONDITION:

Ignition voltage is 10 V to 16 V.

DTC DETECTING CONDITION:

Curtain airbag sensor RH unit internal malfunction

If DTC B1630 is displayed, the circuit within the curtain airbag sensor RH is faulty.

Replace the curtain airbag sensor RH. Curtain Airbag Sensor

Dtc b1632 curtain airbag sensor rh lost communication

DIAGNOSIS START CONDITION:Ignition voltage is 10 V to 16 V.DTC DETECTING CONDITION:Curtain airbag sensor RH communication error (open/short circuit or connector connection failure between airbag CM an ...

Dtc b1628 side airbag sensor lh initialization error

DIAGNOSIS START CONDITION:Ignition voltage is 10 V to 16 V.DTC DETECTING CONDITION:Side airbag sensor LH unit malfunction (sensor type abnormal, sensor unit initialization error)CAUTION:Before perform ...

Other materials:

Installation
1. Before installation, check the steering gearbox. Electric Power Steering Gearbox > INSPECTION2. Install the steering gearbox assembly by tightening the bolts through the stiffener to the specified torque.CAUTION:Be careful not to damage the steering gearbox assembly boot.Tightening torque:60 N&m ...