Subaru Legacy BN/BS (2015-2019) Service Manual: Dtc b280c vdc brake control prohibit

Subaru Legacy BN/BS (2015-2019) Service Manual / Eyesight (diagnostics) / Diagnostic procedure with diagnostic trouble code (dtc) / Dtc b280c vdc brake control prohibit

Detected when error occurs in the VDC. (VDC fluid pressure control prohibited)

NOTE:

Check the VDC. Basic Diagnostic Procedure > PROCEDURE

Dtc b280f combination meter malfunction

Malfunction is detected in the combination meter.DTC DETECTING CONDITION:Defective combination meterTROUBLE SYMPTOM:• All functions of EyeSight system do not operate.• EyeSight warning lig ...

Dtc b280b vdc brake fluid pressure

Detected when error occurs in the VDC. (VDC brake control malfunction 2)NOTE:Check the VDC. Basic Diagnostic Procedure > PROCEDURE ...

Other materials:

Installation
1. PULSATION DAMPER RH1. Install the pulsation damper RH to the fuel injector pipe RH.NOTE:Use a new gasket.Tightening torque:21.6 N·m (2.2 kgf-m, 15.9 ft-lb)2. Install the fuel pipe protector RH.Tightening torque:19 N·m (1.9 kgf-m, 14.0 ft-lb)3. Install the air intake boot. Air Intak ...