Subaru Legacy BN/BS (2015-2019) Service Manual: Dtc b2810 incompatible with eyesight (combination meter)

Subaru Legacy BN/BS (2015-2019) Service Manual / Eyesight (diagnostics) / Diagnostic procedure with diagnostic trouble code (dtc) / Dtc b2810 incompatible with eyesight (combination meter)

Detected when the combination meter, which is not designed exclusively for EyeSight is installed.

DTC DETECTING CONDITION:

Incorrect specifications of combination meter

TROUBLE SYMPTOM:

All functions of EyeSight system do not operate.

NOTE:

Replace the combination meter with the one designed for EyeSight. Combination Meter

Dtc b2811 eps abnormal

Malfunction is detected in the electric power steering.NOTE:Check the electric power steering. Basic Diagnostic Procedure > PROCEDURE ...

Dtc b280f combination meter malfunction

Malfunction is detected in the combination meter.DTC DETECTING CONDITION:Defective combination meterTROUBLE SYMPTOM:• All functions of EyeSight system do not operate.• EyeSight warning lig ...

Other materials:

Installation
1. Install the housing assembly - front axle to the strut assembly.(1) Align alignment marks on the camber adjusting bolt and strut.(2) While holding the bolt head of adjusting bolt, tighten the nut.Tightening torque:155 N·m (15.8 kgf-m, 114.3 ft-lb)2. Install the front drive shaft assembly. ...