Subaru Legacy BN/BS (2015-2019) Service Manual: Dtc b28a2 eyesight communication(vdc)

Subaru Legacy BN/BS (2015-2019) Service Manual / Eyesight (diagnostics) / Diagnostic procedure with diagnostic trouble code (dtc) / Dtc b28a2 eyesight communication(vdc)

Detected when the VDC control module (VDCCM) detects the malfunction of stereo camera.

DTC DETECTING CONDITION:

• Defective CAN system

• Defective VDC control module (VDCCM)

• Defective stereo camera

TROUBLE SYMPTOM:

• All functions of EyeSight system do not operate.

• EyeSight warning light illuminates.

STEP	CHECK	YES	NO
1.CHECK LAN SYSTEM. Perform the diagnosis for LAN system. Basic Diagnostic Procedure > PROCEDURE	Is DTC displayed-	Perform the diagnosis according to DTC.	Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC B28A2 EyeSight COMMUNICATION(VDC)
2.CHECK VDC. Perform the diagnosis for VDC. Basic Diagnostic Procedure > PROCEDURE	Is DTC displayed-	Perform the diagnosis according to DTC.	Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC B28A2 EyeSight COMMUNICATION(VDC)
3.CHECK CONNECTOR. Check the VDC connector and the stereo camera connector.	Is the connector OK-	Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC B28A2 EyeSight COMMUNICATION(VDC)	Repair or replace the connector.
4.CHECK STEREO CAMERA. Read the DTC. Diagnostic Code(s) Display	Is another DTC displayed-	Perform the diagnosis according to DTC.	Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC B28A2 EyeSight COMMUNICATION(VDC)
5.CHECK STEREO CAMERA. 1) Clear the memory. Clear Memory Mode 2) Read the DTC. Diagnostic Code(s) Display	Is the same DTC displayed-	Replace the stereo camera. Stereo Camera > REMOVAL	Even if DTC is displayed, the circuit has returned to a normal condition at this time. Reproduce the failure, and then perform the diagnosis again. NOTE: In this case, temporary poor contact of connector, or temporary open or short circuit of harness may be the cause.

Dtc b28a3 eyesight communication(meter)

Detected when the combination meter detects the malfunction of stereo camera.DTC DETECTING CONDITION:• Defective CAN system• Defective combination meter• Defective stereo cameraTROUB ...

Dtc b28a1 eyesight communication(ecm)

Detected when the engine control module (ECM) detects the malfunction of stereo camera, or when the stereo camera or ECM is assembled incorrectly.DTC DETECTING CONDITION:• Defective CAN system&b ...

Other materials:

Clear memory mode operation
1. On «Start» display, select «Diagnosis».2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed».3. On «Main Menu» display, select «Each System».4. On «Select System» display, select «Headlight / Foglight» and then select «Enter».5. On «Sele ...