Subaru Legacy BN/BS (2015-2019) Service Manual: Dtc c1311 fr hold valve

Subaru Legacy BN/BS (2015-2019) Service Manual / Vehicle dynamics control (vdc) (diagnostics) / Diagnostic procedure with diagnostic trouble code (dtc) / Dtc c1311 fr hold valve

NOTE:

For the diagnostic procedure, refer to “DTC C1362 NORMAL CLOSING VALVE 2 MALFUNCTION”. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC C1362 NORMAL CLOSING VALVE 2

Dtc c1312 fr pressure reducing valve

NOTE:For the diagnostic procedure, refer to “DTC C1362 NORMAL CLOSING VALVE 2 MALFUNCTION”. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC C1362 NORMAL CLOSING VALVE 2 ...

Dtc c1242 rear left abs sensor signal

DTC DETECTING CONDITION:• A fault is detected if the time of decompression or hold exceeds the predetermined time.• A fault is detected if noise of the wheel speed sensor signal is detecte ...

Other materials:

Removal
1. Remove the rear differential. (Sedan model) Rear Differential (VA-type) > REMOVAL Rear Differential (T-type) > REMOVAL2. Disconnect the drain tube (A) from the drain filter.NOTE:Disconnect the quick connector as shown in the figure.(a)Slider3. Remove the drain filter.4. Disconnect the drain tub ...