Subaru Legacy BN/BS (2015-2019) Service Manual: Dtc p0391 camshaft position sensor "b" circuit range/performance bank 2

Subaru Legacy BN/BS (2015-2019) Service Manual / Engine (diagnostics)(h6do) / Diagnostic procedure with diagnostic trouble code (dtc) / Dtc p0391 camshaft position sensor "b" circuit range/performance bank 2

NOTE:

For the diagnostic procedure, refer to DTC P0390. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC P0390 CAMSHAFT POSITION SENSOR "B" CIRCUIT BANK 2

1. OUTLINE OF DIAGNOSIS

NOTE:

For the detection standard, refer to DTC P0366. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC P0366 CAMSHAFT POSITION SENSOR "B" CIRCUIT RANGE/PERFORMANCE BANK 1

Dtc p0400 egr "a" flow

DTC DETECTING CONDITION:Detected when two consecutive driving cycles with fault occur.TROUBLE SYMPTOM:• Movement performance problem when engine is low speed• Improper idling• Moveme ...

Dtc p0390 camshaft position sensor "b" circuit bank 2

DTC DETECTING CONDITION:Immediately at fault recognitionTROUBLE SYMPTOM:• Engine stalls.• Failure of engine to startCAUTION:After servicing or replacing faulty parts, perform Clear Memory ...

Other materials:

Malfunction indicator light does not go off
TROUBLE SYMPTOM:Although malfunction indicator light comes on when the engine runs, DTC is not shown on the Subaru Select Monitor or general scan tool display.STEPCHECKYESNO1.CHECK DTC.Is DTC of engine or LAN system displayed- Read Diagnostic Trouble Code (DTC) > OPERATIONCheck the appropriate DTC ...