Subaru Legacy BN/BS (2015-2019) Service Manual: Dtc u0073 control module communication bus off

Subaru Legacy BN/BS (2015-2019) Service Manual / Vehicle dynamics control (vdc) (diagnostics) / Diagnostic procedure with diagnostic trouble code (dtc) / Dtc u0073 control module communication bus off

NOTE:

Refer to “LAN SYSTEM (DIAGNOSTICS)” for diagnostic procedure. Basic Diagnostic Procedure

Dtc c1741 pressure sensor

DTC DETECTING CONDITION:• A fault is detected if two fluid pressure signals in master cylinder are out of normal range.• A fault is detected if the condition that supply voltage for the fl ...

Dtc u0423 invalid data received from instrument panel cluster control module

NOTE:Refer to “LAN SYSTEM (DIAGNOSTICS)” for diagnostic procedure. Basic Diagnostic Procedure ...

Other materials:

Inspection
1. Visually check the ambient sensor for dirt or damage, and clean or replace as necessary.2. Measure the resistance between ambient sensor terminals.CAUTION:During inspection, be careful not to touch the sensor end in order to avoid misjudgment due to body temperature.Preparation tool:Circuit teste ...