Subaru Legacy BN/BS (2015-2019) Service Manual: Dtc u0155 lost communication with instrument panel cluster (ipc) control module

Subaru Legacy BN/BS (2015-2019) Service Manual / Engine (diagnostics)(h4do) / Diagnostic procedure with diagnostic trouble code (dtc) / Dtc u0155 lost communication with instrument panel cluster (ipc) control module

NOTE:

For the diagnostic procedure, refer to LAN section. Basic Diagnostic Procedure

1. OUTLINE OF DIAGNOSIS

NOTE:

For the detection standard, refer to DTC U0101. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0101 LOST COMMUNICATION WITH TCM

Dtc u0402 invalid data received from tcm

NOTE:For the diagnostic procedure, refer to LAN section. Basic Diagnostic Procedure1. OUTLINE OF DIAGNOSISDetect malfunction of CAN communication.Judge as NG when data received from TCM, VDC CM and c ...

Dtc p2610 ecm/pcm engine off timer performance

DTC DETECTING CONDITION:Detected when two consecutive driving cycles with fault occur.CAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and I ...

Other materials:

Stopping engine
Stop the vehicle completely. Move the select lever to the "P" position. Press the push-button ignition switch. The engine will stop, and the power will be switched off WARNING Do not touch the push-button ignition switch during driving. When the p ...