Subaru Legacy BN/BS (2015-2019) Service Manual: Dtc u0181 lost communication with headlamp leveling control module

Subaru Legacy BN/BS (2015-2019) Service Manual / Combination meter (diagnostics) / Diagnostic procedure with diagnostic trouble code (dtc) / Dtc u0181 lost communication with headlamp leveling control module

Detected when CAN data is not received from auto headlight beam leveler CM.

NOTE:

Perform the diagnosis for LAN system. Basic Diagnostic Procedure > PROCEDURE

Dtc u0327 software incompatibility with vehicle security control module

Detected when CAN data is not received from keyless access CM.NOTE:Perform the diagnosis for LAN system. Basic Diagnostic Procedure > PROCEDURE ...

Dtc b1502 warning box communication malfunction

DTC DETECTING CONDITION:Communication error between combination meter and spot map lightTROUBLE SYMPTOM:Malfunction of the warning light inside the spot map lightWIRING DIAGRAM:NOTE:For the coupling c ...

Other materials:

Disassembly
1. Remove four bolts.2. Use a drier to heat the rear cover (A) portion to 50 — 60°C (122 — 140°F).3. Insert the end of a flat tip screwdriver into the gap between stator core and front cover. Pry them apart to disassemble.(A)Screwdriver4. Using a vise, support the rotor and remove ...