Subaru Legacy BN/BS (2015-2019) Service Manual: Dtc u0423 invalid data received from instrument panel cluster control module

Subaru Legacy BN/BS (2015-2019) Service Manual / Continuously variable transmission (diagnostics) / Diagnostic procedure with diagnostic trouble code (dtc) / Dtc u0423 invalid data received from instrument panel cluster control module

NOTE:

Refer to “LAN SYSTEM (DIAGNOSTICS)” for diagnostic procedure. Basic Diagnostic Procedure

1. OUTLINE OF DIAGNOSIS

• Detect malfunction of CAN communication.

• Judge as NG when data received from the combination meter is not normal.

2. EXECUTION CONDITION

Secondary Parameters	Execution condition
Turbine shaft speed	> 0 rpm
or
D range switch	ON

3. DIAGNOSTIC METHOD

If the duration of time while the following conditions are met is longer than the time indicated, judge as NG.

Judgment Value

Malfunction Criteria	Threshold Value
CAN data from meter	Freeze

Time Needed for Diagnosis: 2 seconds

Dtc u0424 invalid data received from hvac control module

NOTE:Refer to “LAN SYSTEM (DIAGNOSTICS)” for diagnostic procedure. Basic Diagnostic Procedure1. OUTLINE OF DIAGNOSIS• Detect malfunction of CAN communication.• Judge as NG whe ...

Dtc u0422 invalid data received from body control module

NOTE:Refer to “LAN SYSTEM (DIAGNOSTICS)” for diagnostic procedure. Basic Diagnostic Procedure1. OUTLINE OF DIAGNOSIS• Detect malfunction of CAN communication.• Judge as NG whe ...

Other materials:

Removal
1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the bumper face - front.(1) Remove the clips at the upper side of the bumper face - front.(2) Remove the clips from the fender.(3) Remove the clips at the lower side of the bumper face - front.(4) Disconnect the fog light assembly ...