Subaru Legacy BN/BS (2015-2019) Service Manual: General description

Subaru Legacy BN/BS (2015-2019) Service Manual / Differentials / Rear differential inspection mode / General description

CAUTION:

Be sure to perform rear differential inspection mode.

• Follow the messages displayed on the Subaru Select Monitor when working.

• “Rear differential inspection mode” using the Subaru Select Monitor is available only for the CVT model.

• Perform rear differential inspection mode when the following work has been performed.

Transmission assembly replacement/Replacement of rear differential/Replacement of front differential hypoid gear set/Replacement of rear differential hypoid gear set

Rear differential inspection mode

...

Procedure

CAUTION:Do not turn the power of the Subaru Select Monitor OFF during work, and do not disconnect the data link connector.1. Shift the select lever to “P” range.2. Apply the electronic par ...

Other materials:

Removal
1. Disconnect the ground terminal from battery sensor. NOTE2. Lift up the vehicle, and then remove the rear wheels.3. Remove the sensor assembly - headlight beam leveler. (Model with auto headlight beam leveler) Rear Height Sensor > REMOVAL4. Remove the lateral link assembly - rear.(1) Remove the ...