Subaru Legacy BN/BS (2015-2019) Service Manual: General description

Installation

1. Install the fuel tank protector.NOTE:Use a new self-locking nut (a).Tightening torque:T1: 9 N·m (0.9 kgf-m, 6.6 ft-lb) T2: 18 N·m (1.8 kgf-m, 13.3 ft-lb)2. Lower the vehicle. ...

Specification

Fuel tankCapacity70 L (18.5 US gal, 15.4 Imp gal)LocationUnder rear seatFuel pumpTypeImpellerShutoff discharge pressure940 kPa (9.58 kg/cm2, 136.3 psi), or lessDischarge rate153 L (40.4 US gal, 33.7 I ...

Other materials:

Removal
1. Hold the rear gate to the fully open position.2. Disconnect the ground terminal from battery sensor. NOTE3. Release the claws and then remove the cap - rear quarter pillar UPR LH.4. Remove the rod - power rear gate.CAUTION:• Using a small flat tip screwdriver wrapped with protective tape, ...