Subaru Legacy BN/BS (2015-2019) Owners Manual: Hazard warning flasher
The hazard warning flasher is used to warn other drivers when you have to park your vehicle under emergency conditions. The hazard warning flasher works with the ignition switch in any position. To turn on the hazard warning flasher, press the hazard warning button on the instrument panel. All the turn signal lights and the turn signal indicator lights will flash. To turn off the flasher, press the button again. NOTE When the hazard warning flasher is on, the turn signals do not work. |
Switching power status
1) Operation indicator
2) Push-button ignition switch
The power status is switched every time
the push-button ignition switch is pressed.
Carry the access key, and sit in the
driver ...
Meters and gauges
NOTE
Liquid crystal displays are used in
some of the meters and gauges in the
combination meter. You will find their
indications hard to see if you wear
polarized glasses. ...
Other materials:
Removal
NOTE:• The vanity mirror light is integrated into the sun visor assembly. Replace the sun visor assembly if faulty. Sun Visor > REMOVAL• Do not remove the sun visor assembly if removing the bulb only.1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the sun visor ass ...
