Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Continuously variable transmission(tr690) / Drive plate / Inspection

Check the drive cable for damage.

Removal

1. Remove the transmission assembly from the vehicle. Automatic Transmission Assembly > REMOVAL2. Set the ST.NOTE:Set the ST to the drive plate referring to the illustration.ST 498497300CRANKSHAFT ...

Installation

1. Temporarily install the drive plate and reinforcement drive plate.2. Set the ST.NOTE:Set the ST to the drive plate referring to the illustration.ST 498497300CRANKSHAFT STOPPER3. Tighten the driv ...

Other materials:

Installation
1. Install the front exhaust pipe assembly.NOTE:Use a new gasket.2. Temporarily tighten the nuts which hold front exhaust pipe assembly to cylinder heads.3. Install the bolts, springs and nuts securing the rear exhaust pipe to the front exhaust pipe assembly.NOTE:Use a new gasket.Tightening torque:1 ...