Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Continuously variable transmission(tr690) / Forward clutch assembly / Inspection

• Check the forward clutch drum, internal gear, sun gear and forward clutch piston lip for wear or damage.

• Inspect the drive plate facing for wear and damage.

• Check the driven plate for discoloration (burnt color).

• Check for worn snap ring, fatigue or damaged return spring or deformed spring retainer.

• Make sure the clearance between the retaining plate of forward clutch and the planetary carrier assembly is within the limit. If it exceeds the standard, replace the forward clutch assembly. Forward Clutch Assembly > ASSEMBLY

Installation

1. Select a washer. Forward Clutch Assembly > ADJUSTMENT2. Install the selected washer.3. Install the forward clutch assembly.4. Install the thrust needle bearing.NOTE:Install the thrust needle beari ...

Disassembly

1. Remove the internal gear assembly.2. Remove the snap ring from the internal gear assembly.3. Remove the thrust gear plate.4. Remove the thrust needle bearing.5. Remove the snap ring.6. Remove the p ...

Other materials:

Removal
1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the center grille assembly. Air Vent Grille > REMOVAL3. Remove the heater control assembly. Control Panel > REMOVAL4. Remove the audio assembly.(1) Remove the screws and clips.(2) Disconnect the connector and remove the audio as ...