Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Continuously variable transmission(tr690) / Transmission case / Inspection

• Check the transmission case for damage.

• Check for leakage of CVTF from the connection between converter case and transmission case.

• Check for leakage of CVTF from the connection between intermediate case and transmission case.

• Check the lubrication pipe for bend or damage.

• Check the bearing for smooth operation.

• Check the bearing for seizure or wear.

Installation

1. Clean the mating surface of transmission case and converter case.2. Install the control device system. Transmission Control Device > INSTALLATION3. Install the O-ring to the lubrication pipe.NOTE: ...

Disassembly

1. Remove the CVTF inlet pipe and CVTF outlet pipe.(A)CVTF outlet pipe(B)CVTF inlet pipe2. Remove all plugs from the transmission case.3. Remove the lubrication pipe.4. Remove the oil seal using a scr ...

Other materials:

Installation
1. Install the fuel sub level sensor to the fuel tank.CAUTION:Set the arm and float of the fuel sub level sensor while paying attention to prevent them from contacting the fuel tank. If the arm of the fuel sub level sensor is bent, the fuel gauge may not read correctly.NOTE:Use a new gasket.(1) Make ...