Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Lubrication(h6do) / Engine oil filter / Inspection

1. After installing the oil filter, run the engine and check for oil leakage.

NOTE:

The filter element and filter case are permanently jointed; therefore, interior cleaning is not necessary.

2. Check the engine oil level. Engine Oil > INSPECTION

Removal

CAUTION:If the engine oil is spilt over exhaust pipe or the under cover, wipe it off with cloth to avoid emission of smoke or causing a fire.1. Drain the engine oil. Engine Oil > REPLACEMENT2. Remove ...

Installation

CAUTION:Do not tighten excessively, or oil may leak.1. Clean the oil filter installation surface of the oil cooler.2. Obtain a new oil filter and apply a thin coat of engine oil to the seal rubber.3. ...

Other materials:

Wear indicators
1) New tread 2) Worn tread 3) Tread wear indicator Each tire incorporates a tread wear indicator, which becomes visible when the depth of the tread grooves decreases to 0.063 in (1.6 mm). A tire must be replaced when the tread wear indicator appears as a solid band across the tread. ...