Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Mechanical(h6do) / Engine mounting / Inspection

Check that the engine mounting does not have deformation, cracks and any other damage.

Removal

1. FRONT CUSHION RUBBER1. Fully open the front hood. NOTE2. Remove the collector cover.(1) Carefully pull up the rear of collector cover at two positions (A).(2) Carefully pull up the front of collec ...

Installation

1. FRONT CUSHION RUBBER1. Set the front cushion rubber, and install the bolts securing the front cushion rubber to the chain cover.Tightening torque:25 N·m (2.5 kgf-m, 18.4 ft-lb)2. Install the ...

Other materials:

Installation
1. CYLINDER HEAD RH1. Clean the bolt holes in the cylinder block RH.CAUTION:To avoid erroneous tightening of the bolts, clean out the bolt holes sufficiently by blowing with compressed air to eliminate engine coolant etc.2. Apply liquid gasket to both sides of the cylinder head gasket RH as shown in ...