Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection
1. VISUAL INSPECTION Check for the following, and replace with new parts if necessary. • Seat belt is slackened, bent or worn. • Seat belt is abnormally wound or extended. • Seat belt inner - rear is deformed or damaged. • Seat belt buckle cannot be engaged properly. 2. ELR LOCK MECHANISM INSPECTION 1. Hold the retractor upright (as installed in the vehicle) and check the ELR lock mechanism. 2. Tilt the retractor from the upright posture and check the following points. • It does not lock if the inclination angle is 15° or less.
• It remains locked if the inclination angle is 27° or more.
3. If the ELR lock mechanism does not operate properly, replace the seat belt outer - rear with a new part. |
Removal
1. SEAT BELT OUTER - REAR RH & LH (SEDAN MODEL)CAUTION:• Refer to “CAUTION” of “General Description” before handling the airbag system components. General Description > ...
Installation
1. SEAT BELT OUTER - REAR RH & LH (SEDAN MODEL)CAUTION:If the hook - rear seat is disconnected from the vehicle body, make sure to replace the hook - rear seat with a new part to prevent the decline o ...
Other materials:
Dtc b1808 short in passenger's airbag (to +b)
DIAGNOSIS START CONDITION:Ignition voltage is 10 V to 16 V.DTC DETECTING CONDITION:Short circuit failure in power supply (shorted in main harness power supply, shorted in passenger’s airbag power supply, shorted in airbag CM internal circuit power supply)CAUTION:Before performing diagnosis, re ...
