Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection mode procedure

Subaru Legacy BN/BS (2015-2019) Service Manual / Tire pressure monitoring system (diagnostics) / Inspection mode procedure

Reproduce the malfunction occurrence condition as much as possible. Drive the vehicle at 40 km/h (25 MPH) or faster for at least ten minutes.

General diagnostic table inspection

SymptomsFaulty partsTire pressure warning light illuminates.Tire pressure is reduced.• Improper tire pressure adjustment• Punctured tireTire pressure warning light blinks 25 times and then ...

List of diagnostic trouble code (dtc) list

DTCItemNoteC2021TIRE 1 AIR PRESSURE LOW (NORMAL MODE) Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC C2021 TIRE 1 AIR PRESSURE LOW (NORMAL MODE)C2022TIRE 2 AIR PRESSURE LOW (NORMAL MODE ...

Other materials:

Installation
1. CVT MODEL1. Install the brake pedal assembly.CAUTION:• Apply grease to the snap pin to prevent the operating rod from wear.• Replace the clevis pin with new parts, and apply thin coat of NIGTIGHT LYW No. 2 grease to the clevis pin.Tightening torque:Brake pedal: 18 N·m (1.8 kgf- ...