Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

Subaru Legacy BN/BS (2015-2019) Service Manual / Differentials / Rear differential front member / Installation

Install the rear differential front member with a new self-locking nut.

Tightening torque:

T1: 50 N·m (5.1 kgf-m, 36.9 ft-lb)

T2: 110 N·m (11.2 kgf-m, 81.1 ft-lb)

Inspection

1. Check the rear differential front member for damage, bend and corrosion.If damage, bend or corrosion is excessive, replace the rear differential front member.2. Check the bushings of rear different ...

Rear differential front oil seal

...

Other materials:

Removal
1. Lift up the vehicle, and then remove the front wheels.2. Remove the under cover - front. Front Under Cover > REMOVAL3. Remove the front arm.(1) Pull out the cotter pin (a).(2) Remove the castle nut (b) and bolt.(3) Extract the front arm (c) from the housing assembly - front axle.CAUTION:Use a to ...