Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

Subaru Legacy BN/BS (2015-2019) Service Manual / Entertainment / Front speaker / Installation

1. TWEETER

1. Install the speaker assembly - tweeter.

2. Install the grille speaker side.

3. Install the trim panel - front pillar UPR. Upper Inner Trim > INSTALLATION

4. Connect the ground terminal to battery sensor. NOTE

2. CENTER SPEAKER

1. Install the speaker assembly - center.

2. Install the grille speaker center.

3. Connect the ground terminal to battery sensor. NOTE

3. DOOR SPEAKER

1. Install the speaker assembly - front door.

2. Install the trim panel - front door. Door Trim > INSTALLATION

3. Connect the ground terminal to battery sensor. NOTE

Removal

1. TWEETER1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the trim panel - front pillar UPR. Upper Inner Trim > REMOVAL3. Remove the speaker assembly - tweeter.(1) Release the c ...

General description

...

Other materials:

Dtc b1632 curtain airbag sensor rh lost communication
DIAGNOSIS START CONDITION:Ignition voltage is 10 V to 16 V.DTC DETECTING CONDITION:Curtain airbag sensor RH communication error (open/short circuit or connector connection failure between airbag CM and sensor, sensor internal communication circuit failure, CM internal communication circuit failure)C ...