CAUTION: After installing the center grille assembly, check that the air vent grille of the center grille assembly is inserted correctly into the air vent duct. 1. Install the GPS antenna assembly. 2. Install the audio assembly or navigation assembly. 3. Install the heater control assembly. 4. Install the center grille assembly. 5. Install the combination meter assembly. Tightening torque: 7 N·m (0.7 kgf-m, 5.2 ft-lb) 6. Connect the ground terminal to battery sensor. NOTE |
RemovalRemoval
1. Remove the collector cover.(1) Carefully pull up the rear of collector cover at two positions (A).(2) Carefully pull up the front of collector cover at two positions (B) while moving it forward.2. Disconnect the ground terminal from battery sensor. NOTE3. Disconnect the connector (A) from the oi ...