1. On «Main Menu» display, select «Each System Check». 2. On «Each System Check» display, select «Integ. unit mode». 3. On «Integ. unit mode» display, select «Work Support». 4. On «Work Support» display, select «Active Test». 5. Select an item to be operated on «Active Test» display, and press the [OK] button. 6. Pressing [Next] starts, [End] cancels the operation and [OK] returns to the System Operation Check Mode display screen.
NOTE: If not equipped due to the vehicle settings, the operation will not start. |
Adjustment
1. Measure depth “A” from the ST upper face to the washer catch surface.ST 398643600GAUGE2. Install the forward clutch assembly to intermediate case.3. Setting the ST, measure height “B” from the ST upper side to the intermediate case mating surface.ST 499575600GAUGE4. ...