Subaru Legacy BN/BS (2015-2019) Service Manual: Note
For operation procedures of each component of the cruise control system, refer to the respective section. • Cruise control module: Cruise Control Module • Cruise control command switch: Cruise Control Command Switch • Combination meter: Combination Meter • Stop light and brake switch: Stop Light & Brake Switch • Clutch switch: Clutch Switch • Inhibitor switch: Inhibitor Switch • Transmission control module (TCM): Transmission Control Module (TCM) • Neutral position switch: Neutral Position Switch |
Inspection
Refer to “Basic Diagnostic Procedure” of “CRUISE CONTROL SYSTEM (DIAGNOSTICS)”. Basic Diagnostic Procedure ...
Other materials:
Installation
1. Press in a new pilot bearing to the position where it is flush with the flywheel surface or up to 0.4 mm (0.016 in) deeper than that.CAUTION:Do not press the bearing inner ring.(A)Pilot bearing2. Temporarily tighten the crankshaft position sensor plate and flywheel.NOTE:Align the knock pin hole o ...
