Subaru Legacy BN/BS (2015-2019) Owners Manual: OFF delay timer

Subaru Legacy BN/BS (2015-2019) Owners Manual / Interior equipment / Interior light / OFF delay timer

The following lights have an automatic illumination function.

dome light
map light
cargo area light (Outback)

After being illuminated automatically, these lights remain on for several seconds and then gradually turn off under the following conditions.

after the ignition switch is turned to the "LOCK"/"OFF" position
after any doors or the rear gate (Outback) is closed (dome light)
after all doors are closed (map light)
after the rear gate is closed (cargo area light)
after the doors are unlocked using the keyless access function (if equipped) (dome light and map light)
after the doors are unlocked using the remote keyless entry system (dome light and map light)
when approaching with the access key (if equipped) (dome light and map light)

While the lights are illuminated, if any of the following operations is performed, the lights turn off immediately.

The ignition switch is turned from the "LOCK"/"OFF" position to the "ACC" or "ON" position.
All doors and the rear gate (Outback) are locked using the keyless access function (if equipped).
All doors and the rear gate (Outback) are locked using the remote keyless entry system.

The setting for the period of time in which the lights remain on (OFF delay timer) can be changed by a SUBARU dealer. Contact your SUBARU dealer for details. Also, the setting can be changed by operating the multi information display. For details, refer to"Interior Light" .

Cargo area light (Outback)

1) DOOR 2) OFF 3) ON The cargo area light switch has the following positions. DOOR: The light illuminates only when the rear gate is opened. The light gradually turns off several seconds ...

Sun visors

To block out glare, swing down the visors. To use the sun visor at a side window, swing it down and move it sideways. With the sun visor positioned over the side window, you can slide the su ...

Other materials:

Removal
1. Shift the select lever to “N” range.2. Disconnect the ground terminal from battery sensor. NOTE3. Lift up the vehicle.4. Remove the center exhaust pipe. (2.5 L model) Center Exhaust Pipe > REMOVAL5. Remove the front exhaust pipe and rear exhaust pipe. (3.6 L model) Front Exhaust Pi ...