Honda Civic manuals

Subaru Legacy BN/BS (2015-2019) Service Manual: Operation

For detailed operation procedures, refer to “Application help”.

When the combination meter cannot communicate with Subaru Select Monitor, perform “COMMUNICATION FOR INITIALIZING IMPOSSIBLE”. Subaru Select Monitor > INSPECTION

If the DTCs related to the LAN system are not displayed, perform the inspection by connecting the Subaru Select Monitor to another vehicle which is operating properly and by establishing the communication.

Subaru select monitor
...

Inspection
1. COMMUNICATION FOR INITIALIZING IMPOSSIBLEDETECTING CONDITION:• Defective harness connector• Power supply circuit malfunction• Defective combination meter• Defective CAN comm ...

Other materials:

Dtc p014e a/f / o2 sensor slow response - rich to lean bank 2 sensor 1
DTC DETECTING CONDITION:Detected when two consecutive driving cycles with fault occur.CAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode Inspection Mode > PROCEDURE.STEPCHECKYESNO1.CHECK EXHAUST SYSTEM.NOTE:Check the foll ...

© 2017-2024 Copyright www.sulegacy.com