Subaru Legacy BN/BS (2015-2019) Service Manual: Operation
1. On «Start» display, select «Diagnosis». 2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed». 3. On «Main Menu» display, select «Each System». 4. On «Select System» display, select «Tire Pressure Monitor» and then select «Enter». 5. On «Select Function» display, select «Data Monitor». NOTE: For detailed operation procedures, refer to “Application help”. |
List
DisplayContentReference valueUnit of measureTire 1 FN codeStatus of transmitterNo data received after IGN ON: No data is received after IGN ON.LEARN: Transmitter ID was sent by the transmitter registr ...
Other materials:
Removal
1. Remove the collector cover.(1) Carefully pull up the rear of collector cover at two positions (A).(2) Carefully pull up the front of collector cover at two positions (B) while moving it forward.2. Disconnect the ground terminal from battery sensor. NOTE3. Drain approximately 3.0 L (3.2 US qt, 2. ...
© 2017-2025 Copyright www.sulegacy.com
