Subaru Legacy BN/BS (2015-2019) Service Manual: Operation

Subaru Legacy BN/BS (2015-2019) Service Manual / Airbag system (diagnostics) / Read current data / Operation

Check the operating condition of each sensor in the event of malfunction in the seat belt buckle switch, or when the seat belt buckle switch has been replaced.

1. On «Start» display, select «Diagnosis».

2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed».

3. On «Main Menu» display, select «Each System».

4. On «Select System» display, select «Airbag» and select «Enter».

5. On «Airbag» display, select «Data monitor».

NOTE:

For detailed operation procedures, refer to “Application help”.

List

ItemDisplayNoteTrip Count — General Description > CAUTIONCount — Time Count [msec] — Belt Buckle Switch LHUnbelted/Belted/Other“Belted” when the left side seat belt is fastened&ldqu ...

Other materials:

Removal
1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the trim panel - rear gate UPR and the trim panel - rear gate pillar side. Rear Gate Trim > REMOVAL3. Remove the drip - rear gate. (Except for model with power rear gate)4. Remove the roof spoiler.(1) Disconnect the connector of ...