Subaru Legacy BN/BS (2015-2019) Owners Manual: Other markings

Subaru Legacy BN/BS (2015-2019) Owners Manual / Consumer information and Reporting safety defects / Tire information / Tire labeling / Other markings

The following makings are also placed on the sidewall.

Maximum permissible inflation pressure

The maximum cold inflation pressure to which this tire may be inflated. For example, "350 kPa (51 PSI) MAX. PRESS"

Maximum load rating

The load rating at the maximum permissible weight load for this tire.

For example, "MAX. LOAD 615 kg (1,356 LBS) @ 350 kPa (51 PSI) MAX. PRESS."

WARNING Maximum load rating applies only to the tire, not to the vehicle. Putting a load rated tire on any vehicle does not mean the vehicle can be loaded up to the tire's rated load.

Construction type

Applicable construction of this tire.

For example, "TUBELESS STEEL BELTED RADIAL"

Construction

The generic name of each cord material used in the plies (both sidewall and tread area) of this tire.

For example, "PLIES: TREAD 2 STEEL + 2 POLYESTER + 1 NYLON SIDEWALL 2 POLYESTER"

Uniform Tire Quality Grading (UTQG)

For details, refer to "Uniform tire quality grading standards" F13-14.

Tire Identification Number (TIN)

Tire Identification Number (TIN) is marked on the intended outboard sidewall. The TIN is composed of four groups. Here is a brief review of the TIN with a breakdown of its individual elements. ...

Recommended tire inflation pressure

Recommended cold tire inflation pressure For the recommended cold tire inflation pressure for your vehicle's tires, refer to "Tires" F12-9. Vehicle placard The vehicle placard is affixed to ...

Other materials:

22
Malfunction related to vehicle speed sensor is detected.DIAGNOSIS:Open or shorted circuit in vehicle speed sensor system.TROUBLE SYMPTOM:Cruise control cannot be set. (Cancelled immediately.)STEPCHECKYESNO1.CHECK ABS OR VDC WARNING LIGHT.1) Turn the ignition switch to ON.2) After the initial operati ...