1. Always refer to “CAUTION” and “NOTE” of “General Description” in the same model’s service manual before starting the service. 2. When working under a vehicle which is jacked-up, always be sure to use rigid rack. 3. The parking brake must always be applied during working. Also, in automatic transmission vehicles, keep the select lever set to the P (Parking) range. 4. Be sure the workshop is properly ventilated when running the engine. 5. Be careful not to touch the rotating parts such as a belt or a fan while the engine is operating. 6. Be careful not to touch hot metal parts immediately after the engine has been turned on or off. |
Precautions in trouble diagnosis and repair of electric partsRemoval
1. SEDAN MODEL1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. NOTE2. Remove the trim panel assembly - rear shelf. Rear Shelf Trim > REMOVAL3. Remove the woofer assembly.(1) Disconnect the connector.(2) Remove the bolts, then remove ...