Subaru Legacy BN/BS (2015-2019) Service Manual: Preparation tool
1. SPECIAL TOOL ILLUSTRATION | TOOL NUMBER | DESCRIPTION | REMARKS | | 18460AA050 | CHECK BOARD | Used for inspecting the accelerator pedal. | | — (Newly adopted tool) | SUBARU SELECT MONITOR 4 | Used for setting of each function and troubleshooting for electrical system. NOTE: For detailed operation procedures of Subaru Select Monitor 4, refer to “Application help”. |
2. GENERAL TOOL TOOL NAME | REMARKS | Circuit tester | Used for measuring resistance, voltage and current. | DST-i | Used together with Subaru Select Monitor 4. |
|
• Prior to starting work, pay special attention to the following:1. Always wear work clothes, a work cap, and protective shoes. Additionally, wear a helmet, protective goggles, etc. if necessary ...
(1)Accelerator pedal ASSY(3)Accelerator plateTightening torque: N·m (kgf-m, ft-lb)(2)Clip(4)Accelerator stopperT:7.5 (0.8, 5.5) ...
Other materials:
Removal
1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the clip (A), and loosen the clamps (B) and (C) securing the air intake boot.3. Remove the air intake boot from the air cleaner case (rear) and throttle body, and move it to the left side wheel apron.4. Disconnect the connector (A ...