Subaru Legacy BN/BS (2015-2019) Service Manual: Preparation tool

Subaru Legacy BN/BS (2015-2019) Service Manual / Blind spot detection rear cross traffic alert (diagnostics) / General description / Preparation tool

1. SPECIAL TOOL

ILLUSTRATION

TOOL NUMBER

DESCRIPTION

REMARKS

—

(Newly adopted tool)

SUBARU SELECT MONITOR 4

Used for setting of each function and troubleshooting for electrical system.

NOTE:

For detailed operation procedures of Subaru Select Monitor 4, refer to “Application help”.

2. GENERAL TOOL

TOOL NAME	REMARKS
Circuit tester	Used for measuring resistance, voltage and current.
DST-i	Used together with Subaru Select Monitor 4.

Caution

1. BSD/RCTA(1) In some cases, BSD/RCTA may not work correctly under the following conditions.• In bad weather such as heavy rain, fog, snow, sand storm, etc.• When ice, snow, dirt, etc. co ...

Other materials:

Assembly
1. Install the tie-rod into rack.Tightening torque:90 N·m (9.2 kgf-m, 66.4 ft-lb)NOTE:Check the mating face of rack and tie-rod for foreign matter such as dust etc.2. Apply a coat of grease to the tie-rod groove, and then install the boot - steering gearbox to the housing.CAUTION:Assemble the ...