Honda Civic manuals

Subaru Legacy BN/BS (2015-2019) Service Manual: Procedure

Subaru Legacy BN/BS (2015-2019) Service Manual / Engine (diagnostics)(h4do) / Diagnostics for engine starting failure / Procedure

1. Check of the fuel amount

↓

2. Inspection of starter motor circuit Diagnostics for Engine Starting Failure > STARTER MOTOR CIRCUIT

↓

3. Inspection of ECM power supply and ground line Diagnostics for Engine Starting Failure > CHECK POWER SUPPLY AND GROUND LINE OF ENGINE CONTROL MODULE (ECM)

↓

4. Inspection of ignition control system Diagnostics for Engine Starting Failure > IGNITION CONTROL SYSTEM

↓

5. Inspection of fuel pump circuit Diagnostics for Engine Starting Failure > FUEL PUMP CIRCUIT

↓

6. Inspection of fuel injector circuit Diagnostics for Engine Starting Failure > FUEL INJECTOR CIRCUIT

Ignition control system
CAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode, and Inspection Mode Inspection Mode.WIRING DIAGRAM:• Engine Electrical System ENGINE TYPE FB (WI ...

General description
...

Other materials:

System operation
Operating conditions The BSD/RCTA will operate when all of the following conditions are met.  The ignition switch is in the "ON" position.  The BSD/RCTA warning indicator and BSD/RCTA OFF indicator are turned off.  The vehicle is driven at speeds above 6 mph (10 km/h) ...

© 2017-2026 Copyright www.sulegacy.com