Subaru Legacy BN/BS (2015-2019) Service Manual: Read diagnostic trouble code (dtc) operation

Subaru Legacy BN/BS (2015-2019) Service Manual / Continuously variable transmission (diagnostics) / Read diagnostic trouble code (dtc) operation

1. On «Start» display, select «Diagnosis».

2. On «Vehicle selection» display, input the vehicle information and select «Confirmed».

3. On «Main Menu» display, select «Each System Check».

4. On «Select System» display, select «Transmission Control System».

5. On «Select Function» display, select «DTC».

NOTE:

• For details concerning DTC, refer to List of Diagnostic Trouble Code (DTC). List of Diagnostic Trouble Code (DTC)

• For detailed operation procedures, refer to “Application help”.

Inspection mode procedure

Road Test Road Test ...

At oil temp warning light display

...

Other materials:

Dtc p0852 park/neutral switch input circuit high
DTC DETECTING CONDITION:Detected when two consecutive driving cycles with fault occur.TROUBLE SYMPTOM:Improper idlingCAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode Inspection Mode > PROCEDURE.1. CVT MODELWIRING DIAGRA ...