Subaru Legacy BN/BS (2015-2019) Service Manual: Read diagnostic trouble code (dtc) operation

Subaru Legacy BN/BS (2015-2019) Service Manual / Power rear gate system (diagnostics) / Read diagnostic trouble code (dtc) operation

1. On «Start» display, select «Diagnosis».

2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed».

3. On «Main Menu» display, select «Each System».

4. On «Select System» display, select «Power Rear Gate» and then select «Enter».

5. On «Select Function» display, select «DTC».

NOTE:

• For detailed operation procedures, refer to “Application help”.

• For details concerning DTC, refer to “List of Diagnostic Trouble Code (DTC)”. List of Diagnostic Trouble Code (DTC)

List of diagnostic trouble code (dtc) list

DTCItemReferenceB2500BATTERY POWER SUPPLY Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC B2500 BATTERY POWER SUPPLYB2507PRG MOTOR CIRCUIT OPEN Diagnostic Procedure with Diagnostic Troub ...

Control module i o signal

...

Other materials:

Removal
1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the heater control assembly.(1) Release the clips and claws, then detach the control module cover.(2) Release the screws and clips, then detach the heater control assembly.CAUTION:• Insert a flat tip screwdriver wrapped with ...