Subaru Legacy BN/BS (2015-2019) Service Manual: Read diagnostic trouble code (dtc) operation

Subaru Legacy BN/BS (2015-2019) Service Manual / Vehicle dynamics control (vdc) (diagnostics) / Read diagnostic trouble code (dtc) operation

1. On «Start» display, select «Diagnosis».

2. On «Vehicle selection» display, input the vehicle information and select «Confirmed».

3. On «Main Menu» display, select «Each System Check».

4. On «Select System» display, select «Brake Control System».

5. On «Select Function» display, select «DTC».

NOTE:

• For details concerning DTCs, refer to “List of Diagnostic Trouble Code (DTC)”. List of Diagnostic Trouble Code (DTC)

• For detailed operation procedures, refer to “Application help”.

List of diagnostic trouble code (dtc) list

DTCItemContent of diagnosisReferenceC1211FRONT RIGHT ABS SENSOR CIRCUITOpen/high input of front ABS wheel speed sensor RH Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC C1211 FRONT RIGH ...

Control module i o signal

...

Other materials:

Removal
1. Remove the collector cover.(1) Carefully pull up the rear of collector cover at two positions (A).(2) Carefully pull up the front of collector cover at two positions (B) while moving it forward.2. Remove the air intake duct. Air Intake Duct > REMOVAL3. Loosen the nut (A).4. Loosen the bolt (B).5 ...