Subaru Legacy BN/BS (2015-2019) Service Manual: Read diagnostic trouble code (dtc) operation

Subaru Legacy BN/BS (2015-2019) Service Manual / Airbag system (diagnostics) / Read diagnostic trouble code (dtc) operation

1. On «Start» display, select «Diagnosis».

2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed».

3. On «Main Menu» display, select «Each System».

4. On «Select System» display, select «Airbag» and select «Enter».

5. On «Airbag» display, select «DTC».

NOTE:

• For detailed operation procedures, refer to “Application help”.

• For details concerning DTC, refer to List of Diagnostic Trouble Code (DTC) in AIRBAG SYSTEM. List of Diagnostic Trouble Code (DTC)

Inspection mode procedure

Recreate the circumstance by referring to the conditions described in the checklist. ...

Airbag control module i o signal

...

Other materials:

Installation
1. Set the engine wiring harness to the engine, and connect the connector.NOTE:• If the clip is damaged, replace it with a new part.• Before replacing the clip, put an alignment mark (a) on both engine wiring harness and clip to remove the clip, and then align to the alignment mark (a) t ...