Subaru Legacy BN/BS (2015-2019) Service Manual: Removal
CAUTION: • Be careful of the following items. Failure to do so may cause the airbag system malfunction. – Yellow connectors and harnesses with yellow tapes around them are the connectors and harnesses for the airbag system. When using a tester on these circuits, follow the cautions of “AIRBAG SYSTEM”. General Description > CAUTION – Be careful not to damage the airbag system wiring harness when servicing the electrical parts around the steering column. • Be careful not to damage the airbag system wiring harness when servicing the center brake pipe. • When removing the brake pipe, do not bend. NOTE: The airbag system wiring harness is routed near the center brake pipe. |
Brake pipe
...
Inspection
Check the pipe for crack and damage, and also check the connection for fluid leakage. If any faulty is found, repair or replace the relevant part.NOTE:Use a mirror when inspecting back sides and other ...
Other materials:
Assembly
1. Apply grease to the shaft sliding surfaces of the internal gear assembly.Grease:Multemp #6129 or equivalent2. Assemble the shaft to the internal gear assembly.3. Assemble the overrunning clutch as follows:(1) Apply grease to the spline portion of the shaft.Grease:Multemp #6129 or equivalent(2) In ...
